Geophysical Evidence of a Relict Oceanic Crust in the Southwestern Scotia Sea     

Lodolo  Emanuele  Coren  Franco  Schreider  Anatoly A.  Ceccone  Giulio 《Marine Geophysical Researches》1997,19(5):439-450

The southwestern part of the Scotia Sea, at the corner of the Shackleton Fracture Zone with the South Scotia Ridge has been investigated, combining marine magnetic profiles, multichannel seismic reflection data, and satellite-derived gravity anomaly data. From the integrated analysis of data, we identified the presence of the oldest part of the crust in this sector, which tentative age is older than anomaly C10 (28.7 Ma). The area is surrounded by structural features clearly imaged by seismic data, which correspond to gravity lows in the satellite-derived map, and presents a rhomboid-shaped geometry. Along its southern boundary, structural features related to convergence and possible incipient subduction beneath the continental South Scotia Ridge have been evidenced from the seismic profile. We interpret this area, now located at the edge of the south-western Scotia Sea, as a relict of ocean-like crust formed during an earlier, possibly diffuse and disorganized episode of spreading at the first onset of the Drake Passage opening. The successive episode of organized seafloor spreading responsible for the opening of the Drake Passage that definitively separated southern South America from the Antarctic Peninsula, instigated ridge-push forces that can account for the subduction-related structures found along the western part of the South Scotia Ridge. This seafloor accretion phase occurred from 27 to about 10 Ma, when spreading stopped in the western Scotia Sea Ridge, as resulted from the identification of the marine magnetic anomalies.  相似文献   

Seismic structure and tectonics of the Shackleton Fracture Zone (Drake Passage,Scotia Sea)     

Riccardo?Geletti  Emanuele?LodoloEmail author  Anatoly?A.?Schreider  Alina?Polonia 《Marine Geophysical Researches》2005,26(1):17-28

The structural framework of the southern part of the Shackleton Fracture Zone has been investigated through the analysis of a 130-km-long multichannel seismic reflection profile acquired orthogonally to the fracture zone near 60° S. The Shackleton Fracture Zone is a 800-km-long, mostly rectilinear and pronounced bathymetric lineation joining the westernmost South Scotia Ridge to southern South America south of Cape Horn, separating the western Scotia Sea plate from the Antarctic plate. Conventional processing applied to the seismic data outlines the main structures of the Shackleton Fracture Zone, but only the use of enhanced techniques, such as accurate velocity analyses and pre-stack depth migration, provides a good definition of the acoustic basement and the architecture of the sedimentary sequences. In particular, a strong and mostly continuous reflector found at about 8.0 s two-way traveltime is very clear across the entire section and is interpreted as the Moho discontinuity. Data show a complex system of troughs developed along the eastern flank of the crustal ridge, containing tilted and rotated blocks, and the presence of a prominent listric normal fault developed within the oceanic crust. Positive flower structures developed within the oceanic basement indicate strike-slip tectonism and partial reactivation of pre-existing faults. Present-day tectonic activity is found mostly in correspondence to the relief, whereas fault-induced deformation is negligible across the entire trough system. This indicates that the E–W-directed stress regime present in the Drake Passage region is mainly dissipated along a narrow zone within the Shackleton Ridge axis. A reappraisal of all available magnetic anomaly identifications in the western Scotia Sea and in the former Phoenix plate, in conjunction with new magnetic profiles acquired to the east of the Shackleton Fracture Zone off the Tierra del Fuego continental margin, has allowed us to propose a simple reconstruction of Shackleton Fracture Zone development in the general context of the Drake Passage opening.  相似文献   

Determination of cadmium(II), copper(II), manganese(II) and nickel(II) species in Antarctic seawater with complexing resins   总被引：1，自引：0，他引：1  

Raffaela Biesuz  Giancarla Alberti  Girolamo D'Agostino  Emanuele Magi  Maria Pesavento 《Marine Chemistry》2006,101(3-4):180-189

The strong species of cadmium(II), copper(II), manganese(II) and nickel(II) in an Antarctic seawater sample are investigated by a method based on the sorption of metal ions on complexing resins. The resins compete with the ligands present in the sample to combine with the metal ions. Two resins with different adsorbing strengths were used. Very stable metal complexes were investigated with the strong sorbent Chelex 100 and weaker species with the less strong resin, Amberlite CG-50. Strong species were detected for three of the considered metal ions, but not for Mn(II). Cu(II) is completely linked to species with a side reaction coefficient as high as log α_M(I) = 11.6 at pH = 7.3. The ligand concentration was found to be similar to that of the metal ion, and the conditional stability constant was around 10²⁰ M^− 1. In the considered sample, only a fraction of the metal ions Cd(II) and Ni(II) is bound to the strong ligands, with side reaction coefficients equal to log α_M(I) = 5.5 and 6.5 at pH = 7.3 for Cd(II) and Ni(II), respectively. These findings were confirmed by the test with the weaker sorbent Amberlite CG-50. It can be calculated from the sorption equilibria that neither Mn(II) nor Ni(II) is adsorbed on Amberlite CG-50 under the considered conditions and, in fact, only a negligible fraction of Mn(II) and Ni(II) was adsorbed. A noticeable fraction of Cd(II) was adsorbed on Amberlite CG-50, meaning that cadmium(II) is partially linked to weak ligands, possibly chloride, while no copper(II) was adsorbed on this resin, confirming that copper(II) is only combined in strong species. These results are similar, but not identical, to those obtained for other seawater samples examined in previous investigations.  相似文献   

The Impact of Atmosphere–Ocean–Wave Coupling on the Near-Surface Wind Speed in Forecasts of Extratropical Cyclones     

Gentile  Emanuele S.  Gray  Suzanne L.  Barlow  Janet F.  Lewis  Huw W.  Edwards  John M. 《Boundary-Layer Meteorology》2021,180(1):105-129

  相似文献   

Melt/biotite B/B isotopic fractionation and the boron local environment in the structure of volcanic glasses     

Sonia Tonarini  Claudia Forte  Giorgio Ferrara 《Geochimica et cosmochimica acta》2003,67(10):1863-1873

This paper is focused on the role of boron coordination in determining the ¹¹B/¹⁰B isotopic fractionation between melt/glass and biotite at magmatic temperatures. For this purpose, three evolved volcanic rocks from Roccastrada, Mt. Amiata, and Mt. Cimini belonging to the Neogene-Quaternary magmatism of central Italy were studied. In these samples, the measured boron biotite-glass partition coefficient ranges between 0.004 and 0.011, indicating that boron behaves as an incompatible element during biotite crystallization. The ¹¹B magic-angle spinning nuclear magnetic resonance (NMR) spectra reveal the presence of trigonal BO_3/2 units, tetrahedral BO_4/2⁻ sites, and three-coordinated BO_2/2O⁻ species containing one nonbridging oxygen. The relative contributions of these different boron sites were estimated by spectral deconvolution, and it was observed that the fraction of trigonally coordinated boron decreases with increasing K₂O concentration in the glass. The ¹¹B/¹⁰B isotopic fractionation between biotite and melt/glass was observed to be large even at magmatic temperatures and was found to be 1.0066 (Roccastrada sample), 1.00535 (Mt. Amiata sample), and 1.00279 (Mt. Cimini sample). Fractionation is mostly related to the relative amount of trigonal and tetrahedral boron sites in the glass network rather than to other processes, including the speciation of hydrous species in the glass structure. The measured α values are significantly higher than the calculated ones obtained using the reduced partition function ratios (RPFRs) for B(OH)₃ and B(OH)₄⁻ as reported by Kakihana et al. (1977) and the abundance of trigonal and tetrahedral boron obtained by ¹¹B NMR spectra. Furthermore, a nonlinear relationship is observed between the percentage of BO₄ in the glass structure and the measured 1000lnα, suggesting that the approximation of monomeric B(OH)₃ and B(OH)₄⁻ species contributions through ideal mixing in calculating the RPFRs in polyanions (Oi et al., 1989) probably does not apply to silicate glasses.The large B isotopic fractionation measured between glass and biotite and its dependence on the boron coordination in the glass are a limitation to the use of δ¹¹B in the mineral to characterize magmas. Nonetheless, the high incompatible behavior of boron in the most common magmatic minerals rules out that fractional crystallization significantly modified the B isotopic composition of the melt.  相似文献   

A statistical-based approach for determining the intensity of unrest phases at Stromboli volcano (Southern Italy) using one-step-ahead forecasts of displacement time series   总被引：1，自引：0，他引：1  

Tommaso Carlà  Emanuele Intrieri  Federico Di Traglia  Nicola Casagli 《Natural Hazards》2016,84(1):669-683

  相似文献   

Geologic remote sensing (Ninth Thematic Conference)     

Emanuele Roccatagliata  Giorgio Saio 《GeoJournal》1992,27(3):315-318

Geologic remote sensing (Ninth Thematic Conference)  相似文献   

Microlevelling procedures applied to regional aeromagnetic data: an example from the Transantarctic Mountains (Antarctica)   总被引：1，自引：0，他引：1  

Fausto Ferraccioli  Marco Gambetta  & Emanuele Bozzo 《Geophysical Prospecting》1998,46(2):177-196

The extensive application of digital enhancement and filtering as a powerful tool for aeromagnetic interpretation, not only of high resolution but also of regional data, requires an improved levelling. Two microlevelling techniques were thus compared in order to find an effective but relatively simple procedure to remove, or at least to reduce, residual magnetic errors remaining after standard levelling processes. This study was carried out on regional aeromagnetic data recently acquired at high magnetic latitudes along the Transantarctic Mountains in Antarctica, where it is particularly critical to remove time-dependent magnetic variations. Two-dimensional FFT filters applied to the gridded data, namely the Butterworth and a directional cosine filter, proved to be more effective than previously proposed one-dimensional space-domain filters in the reduction of the 'residual corrugation' not removed by statistical levelling. Tectonic interpretation of trends detected in the total field magnetic anomaly map and in the 3D analytic signal improved after application of frequency-domain microlevelling. However, we also show that when interpreting microlevelled data, two factors must be considered: (i) the possible presence of real geological trends aligned along the flight lines; (ii) modifications in the results yielded by depth estimates of magnetic sources due to the FFT filters applied during the microlevelling procedure. Such changes were seen both in the well-established 2D FFT method, based on the slope of the energy spectrum, and in the more recent 3D Euler deconvolution technique. Overall our results indicate that microlevelling could profitably be applied to older gridded aeromagnetic data sets in Antarctica, thus improving the accuracy and geological significance of future regional magnetic compilations, as already seen in other continents.  相似文献   

Increasing resolution of climate assessment and projection of temperature and precipitation in an alpine area     

Emanuele Eccel  Rodica Tomozeiu 《Theoretical and Applied Climatology》2015,120(3-4):479-493

  相似文献   

A three-dimensional hydrogeological–geophysical model of a multi-layered aquifer in the coastal alluvial plain of Sarno River (southern Italy)     

R. Di Maio  S. Fabbrocino  G. Forte  E. Piegari 《Hydrogeology Journal》2014,22(3):691-703

The coastal alluvial plain of Sarno River (Campania Region, southern Italy) is a very rich environment that has experienced a long history of changes due to both natural phenomena such as eustatic sea-level variations and deposition of volcanoclastic sediments, and human civilizations who populated this area since historical times. As a result, it is characterized by complex stratigraphic sequences and groundwater flow systems. The architecture of the multi-layered aquifer system in a sample area, located in a densely urbanized sector at the mouth of Sarno River, was reconstructed. Starting from the analysis of stratigraphic log data and laboratory geotechnical measurements, the lithostratigraphical-unit sequence was retrieved and a realistic three-dimensional (3D) model of the hydrogeological heterogeneity was obtained. The results of a detailed 2D electrical resistivity tomography survey were used to support the analysis of the spatial heterogeneity of the aquifer system in a sector characterized by lack of log data. The integration of hydrogeological and geophysical data allowed for the reconstruction of a 3D hydrogeophysical model of the multi-layered system, which electrically characterizes and geometrically identifies two aquifers. Finally, piezometric-level measurements validated the hydrogeological–geophysical model and showed the effectiveness of the methodology.  相似文献